Finished sanding the gunwales and around the drain holes, no looking
for suggestions on primer and paint for a 32 year old windmill?
:: Thanks. It is tonight's project.
::
:: :: Plug the hole with some dowel stock, use some 5min epoxy
:: :: to make sure it doesn't move. Also make it flush with
:: :: the transom. Now you can redrill the hole off-set to the
:: :: larger size.
:: ::
:: :: :: My stern drain holes are leaking around the rubber
:: :: :: stoppers and I want to correct this by boring bigger
:: :: :: holes and putting in a about a 1/2" pvc pipe with plug
:: :: :: in each hole. Problem: the existing holes are about
:: :: :: 1/8th inch from the bottom of the transom. Suggestions?
