Windmill Class Association

Good day

Great news that you have decided to get back into the windmill.

I am the one of the Fleet 21 memebers I live on long island as do the majority of this fleet.

Depending on where you are in Ct I might be able to come by and see the boat. As Allen says photos are a great help.

The problem you are having dose not sound bad at all. I would check the tanks to make sure that they do not leak before just touching up the Gel coat. It is easy to do I can tell you how.

Good luck Roy

:: Hello All,

:: Now that I am sitting here, I cannot remember my hull
:: number other than it starts with a 5 _ _ _. It’s a
:: Mormon fiberglass hull. Anyway, i bought the boat used
:: about 14 years ago from the Saratoga sailing club and
:: used it for a few years until my first son was born.
:: After that it sat on its trailer with the cover on it.
:: Well long story short the cover became dislodged and I
:: neglected to put it back. Now I am getting the itch to
:: teach my boys to sail, so I cleaned it out today. The
:: bad news is I noticed several areas where the floor
:: meets the sides that the gelcoat flaked off and there is
:: exposed fiberglass. Can anyone tell me if this is
:: repairable and if so where I can find a good source of
:: information? I live in Connecticut if that matters at
:: all. Thank you in advance for any information.

:: Respectfully,
::
:: Eric Borden